• RUIJIE RG-AP740-I Wireless Access Point
RUIJIE RG-AP740-I Wireless Access Point

RUIJIE RG-AP740-I Wireless Access Point

0 đánh giá

Kho: Còn hàng
Bảo hành: 36 tháng
0 VNĐ
Số lượng:

Model

RG-AP740-I

Target Deployments

For campuses, offices, hospitals, and hotspots of service providers

Basic Specifications

Radio

Concurrent tri-radio dual-band

Protocol

802.11a/b/g/n/ac

Wave 2

Operating Bands

802.11b/g/n: 2.4GHz to 2.483GHz

802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (vary depending on countries)

Antenna

Built-in "X-Sense 4" Smart Antenna

4×4 MU-MIMO                                      

Max Throughput

1733Mbps/800Mbps/433Mbps per radio

2966Mbps per AP

 

 Spatial Streams

4

Modulation

OFDM: BPSK@6/9Mbps

QPSK@12/18Mbps

16-QAM@24Mbps

64-QAM@48/54Mbps

DSSS:

DBPSK@1Mbps

DQPSK@2Mbps

CCK@5.5/11Mbps

MIMO-OFDM:

PSK, QPSK, 16QAM, 64QAM and 256QAM

Receiver Sensitivity

11b:-91dBm(1Mbps),-88dBm(5Mbps),-85dBm(11Mbps)

11a/g:-89dBm(6Mbps),-80dBm(24Mbps),-76dBm(36Mbps),-71dBm(54Mbps)

11n:-83dBm@MCS0,-65dBm@MCS7,-83dBm@MCS8,-65dBm@MCS15

11ac HT20:-83dBm(MCS0), -57dBm(MCS9)

11ac HT40:-79dBm(MCS0), -57dBm(MCS9)

11ac HT80:-76dBm(MCS0), -51dBm(MCS9)

Maximum Transmit Power

100mw

Adjustable Power

1dBm

IP Rating

IP41

Ports

Service Port

2 10/100/1000BASE-T Ethernet uplink ports (Both ports support PoE) 1 USB port

Management Port

1 console port

Power

Power Supply

Local power supply (DC 48V) and PoE+ (802.3af/802.3at)

Support dual PoE for power backup

(Power adapters sold separately)

Power Consumption

<25.4W

WLAN

Maximum clients per AP

Up to 612

BSSID capacity

Up to 16 per radio                                                          Up to 48 per AP

SSID hiding

Support

Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID

Support

Remote Intelligent Perception Technology (RIPT)

Support

X-speed

Support

Intelligent load balancing based on the number of users or traffic

Support

STA control

SSID/radio-based

Bandwidth control

STA/SSID/AP-based speed control

Preference for 5GHz (band select)

Support

Wireless position tracking

Support

Dynamic Frequency Selection(DFS)

Future Release Support

Security

PSK, Web, and 802.1x authentication

Support

Data encryption

WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)

SMS authentication

Support

PEAP authentication

Support

Data frame filtering

Whitelist, static/dynamic blacklist

User isolation

Support

Rogue AP detection and countermeasure

Support

Dynamic ACL assignment

Support

RADIUS

Support

Wireless Intrusion Detection System(WIDS)

Support

Wireless Intrusion Prevention System (WIPS)

Support

Bluetooth

iBeacon

Support

Routing

IPv4 address

Static IP address or DHCP reservation

IPv6 CAPWAP tunnel

Support

ICMPv6

Support

IPv6 address

Manual or automatic configuration

Multicast

Multicast to unicast conversion

Management and Maintenance

Network management

SNMP v1/v2C/v3, Telnet, TFTP, Web management

One-click Optimization

Support

(need to integrate with WIS)

Fault detection and alarm

Support

Cloud AC management

Support

Statistics and logs

Support

FAT/FIT switching

The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.

The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.

External Characteristics

Lock

Support

LED Indicators

1 LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to silent mode)

Relevant Standard

Wi-Fi Alliance Certification

Support

Safety Standard

GB4943, EN/IEC 60950-1

EMC Standard

GB9254, EN301 489

Health Standard

EN 62311

Radio Standard

EN300 328, EN301 893

Vibration Standard

IEC60068 2-31, ETSI EN300 019,

NEBS GR-63-CORE

 

Dimensions (W x D x H) (mm)

230 × 230 × 42

Specifications

(Height of AP only, excluding case and mount kit)

 

Weight

1.3kg

Work Environment

Temperature

Operating Temperature: -10°C to 50°C

Storage Temperature: -40°C to 70°C

Humidity

Operating Humidity: 5% to 95% (non-condensing)

Storage Humidity: 5% to 95% (non-condensing)

Installation Mode

Ceiling/wall-mountable

Equipped with Ruijie’s highly acclaimed X-Sense Smart Antenna, the Ruijie RG-AP740-IWireless AP tops the class by supporting the latest 802.11ac Wave 2 standard, 4 spatial streams and MU-MIMO. Powering a tri-radio design, the RG-AP740-I AP offers access rates of up to 1733Mbps and 800Mbps with the 2 main radio units, eliminating the performance bottleneck of high-speed Wi-Fi over 1000Mbps. The AP hence speeds up the Wi-Fi performance to up to 2.966Gbps per device. Gearing up with the industry-leading “X-Sense 4” antenna, the RG-AP740-I greatly improves the AP coverage performance and ensures an optimal access experience for smart mobile devices. The AP also features security, radio.

Patented X-sense™ Smart Antenna

X-Sense 4 Smart Antenna

•    Automated Selection of Optimum Signal Paths

Gearing up with the patented Smart Antenna matrix architecture, the AP740-I supports multiple antenna combinations and effectively solves the weakness of coverage dead zones of traditional antennas.

•    Enhanced Signal Strength with the Same Power

The AP740-I accurately calculates the location of smart devices and improves the signal strength accordingly with dynamic combinations of antennas, ensuring the best signal coverage.

•    Reduced Interference & Simplified Deployment

The AP740-I Series automatically adjust the wireless signal output direction according to the user location. When subject to interference, the Smart Antenna and X-Sense™ Smart Antenna technology can effectively reduce interference by more than 30%.

Performance Proven by 3rd Party Independent Validation, Tolly Certified

Tolly Certification Report

Tolly Group is one of the reputable 3rd party independent performance testing organization. Over 65% of Fortune 100 Companies turn to Tolly Reports to assist in strategic technology decisions.

The Ruijie AP740-I performance is further validated in Tolly certified report. We have outperformed other major vendor flagship wireless access point in the real-world performance rating.

High Density WiFi Experience

•    Pre-AX, Minimizes Co-channel & Other Interferences

Pre-AX Technology Optimizing WiFi Experience

DCCA/DTPC is adopted from 802.11ax technology to dynamically fine tune RSSI threshold to maximize the utilizable spectrum and allow more data to be transmitted. Each AP optimize the RF channel and power according to each client.

•    CorrectLink, Improves Traffic Load Balancing & Client Roaming

CorrectLink Technology Optimizing WiFi Experience

CorrectLink technology is designed to analyses the latency, jitter and the signal strength of each client. It also correlates with additional information like wireless channel utilization and throughput to optimize the best user experience for wireless client.

•    AirReorder, Smart Airtime Scheduling Technology

AirReorder Allocating Time Slots to Terminals

The fundamental of AirReorder is to allocate the equal the time slot to ensure that each terminal can get the fairness of RF resources as possible. This can prevent lower data rate client to degrade entire network performance by occupying the limited shared medium.

Seamless Integration with WIS Cloud

WIS Cloud Smart Services Platform

Ruijie WIS is an AI-based intelligent services designed for WiFi optimization on the cloud. Seamlessly integrated with Ruijie hardware AC on premise helps to streamline WiFi deployment planning, delivery testing as well as operation diagnosis. With WIS you can:

•    Cloud site survey for deployment planning

•    Smart mobile APPS for provisioning

•    Visualize the user experience

•    One-click WiFi optimization

•    and it is FREE!

Ruijie MOHO App for WiFi Testing

As part of the Ruijie WIS solution, Ruijie MOHO is a mobile app designed to carry out WiFi testing from your fingertips. Comprehensive testing tools like collaborative test, speed test, multi-point test and etc. are available for in Ruijie MOHO app that freely download from IOS APP Store & Google Play.

WISπ One-click Optimization

Another key feature from Ruijie WIS, WISπ provides one-click optimization by using the AI based machine learning automated correlation based on the real-time information gather from your WiFi network. It truly optimizes the entire WiFi network performance by providing the best suitable configuration fine-tuning by just a click.  

Virtual AP Technology

Virtual AP Enhancing Network    Security

In most of the enterprise today, providing a Guest WiFi to visitor is an essential. However, Guest WiFi might become another entry point for network intrusion either it is intended or not.

Ruijie AP Virtualization technology allows to virtualize a physical AP into multiple virtual AP to handle different services. Different VAP can connect to different AC to ensure the only authorized user access to right resource.

With VAP, you can now enjoy from its benefit of:

•    Resource isolation

•    Flexible authentication

•    Minimize RF interference

•    Cost effective & secured

Benefit from the dual GE uplink design of AP740, two different CAPWAP tunnel separating employee WiFi and guest WiFi traffic into two different physical uplinks further enhanced the security.

Virtual AC Technology

Virtual AC Enabling Centralized    Management

Ruijie Network AC Virtualization technology help to virtualize multiple AC into single logical AC regardless of module or appliance-based AC. It supports up to 8 members of hardware AC in single high availability cluster. AP license is shared from the license pool regardless of the number of AC in the cluster.

With the centralized management and distributed processing capability, it increases the scalability and resilience of entire Wireless Network. Simplified management streamline the IT operation as well.

PPSK Authentication

Simple and Effective Wireless Security Practice

Traditional Pre-shared keys (PSK) are shared by all users on a WLAN, giving it potential risk of PSK leak-out.

Ruijie Per-user PSK (PPSK) is an easy setup wireless authentication method with enterprise grade security level. Credentials can be created and revoked individually. Each PPSK can also be tied to a unique user/machine.

With PPSK, you can enjoy its benefit of:

•    High security by using different passwords for each user and device at individual SSID

•    Simple deployment, allow for batch account creation

•    Ease of use and offers the same experience as WPA / WPA2-PSK

•    Out-of-box feature in AC controller

•    No additional AAA required

Bluetooth iBeacon Application

iBeacon    for O2O    Marketing

The AP700 series comes with built-in BT4.0 module, brings revolutionary changes to LBS marketing through iBeacon. iBeacon, first developed by Apple and later widely supported by other mobile devices, is a protocol leveraging Bluetooth low-energy (BLE) wireless technology to provide location-based information and services.
Gearing up with this BT 4.0 integration, the AP becomes a powerful O2O marketing tool, enabling customers to get exclusive offers from nearby shops, view details on mobile when they are close to a featured product, get alerts on what’s in-store next and many more.

Thông Tin Tham Khảo

Hình ảnh sản phẩm:

201681727578856.jpg

20187519408239.jpg

20187519580256.jpg

2018751948238.jpg

  • 0 Bình luận

    commentor

Tags:
Viết đánh giá
1. Đánh giá sản phẩm

2. Nội dung đánh giá0 ký tự

Đang xử lý...

Chúc mừng bạn đã đăng ký thành công ! Đăng nhập Đóng