0 đánh giá
Model |
RG-AP720-I |
|
Target Deployments |
For campuses, offices, hospitals, and hotspots of service providers |
|
Basic Specifications |
Radio |
Concurrent dual-radio dual-band |
Protocol |
802.11a/b/g/n/ac |
|
Wave 2 |
||
Operating Bands |
802.11b/g/n: 2.4GHz to 2.483GHz |
|
802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (vary depending on countries) |
||
Antenna |
Built-in Smart Antenna |
|
2×2 MU-MIMO |
||
Max Throughput |
400Mbps@2.4GHz |
|
867Mbps@5GHz |
||
1267Mbps per AP |
||
Spatial Streams |
2 |
|
Modulation |
OFDM: BPSK@6/9Mbps |
|
QPSK@12/18Mbps |
||
16-QAM@24Mbps |
||
64-QAM@48/54Mbps |
||
DSSS: |
||
DBPSK@1Mbps |
||
DQPSK@2Mbps |
||
CCK@5.5/11Mbps |
||
MIMO-OFDM: |
||
BPSK, QPSK, 16QAM, 64QAM and 256QAM |
||
Receiver Sensitivity |
11b:-91dBm(1Mbps),-88dBm(5Mbps),-85dBm(11Mbps) |
|
11a/g:-89dBm(6Mbps),-80dBm(24Mbps),-76dBm(36Mbps),-71dBm(54Mbps) |
||
11n:-83dBm@MCS0,-65dBm@MCS7,-83dBm@MCS8,-65dBm@MCS15 |
||
11ac HT20:-83dBm(MCS0), -57dBm(MCS9) |
||
11ac HT40:-79dBm(MCS0), -57dBm(MCS9) |
||
11ac HT80:-76dBm(MCS0), -51dBm(MCS9) |
||
Maximum Transmit Power |
100mw |
|
Adjustable Power |
1dBm |
|
IP Rating |
IP41 |
|
Ports |
Service Port |
2 10/100/1000BASE-T Ethernet ports (LAN1 port supports PoE & Uplink) 1 USB port |
Management Port |
1 console port |
|
Power |
Power Supply |
Local power supply (DC 48V) and PoE+ (802.3af/at) |
(Power adapters sold separately) |
||
|
||
Power Consumption |
<12.95W |
|
WLAN |
Maximum clients per AP |
Up to 256 |
BSSID capacity |
Up to 16 per radio Up to 32 per AP |
|
SSID hiding |
Support |
|
Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID |
Support |
|
Remote Intelligent Perception Technology (RIPT) |
Support |
|
X-speed |
Support |
|
Intelligent load balancing based on the number of users or traffic |
Support |
|
STA control |
SSID/radio-based |
|
Bandwidth control |
STA/SSID/AP-based speed control |
|
Preference for 5GHz (band select) |
Support |
|
Wireless position tracking |
Support |
|
Dynamic Frequency Selection(DFS) |
Future Release Support |
|
Security |
PSK, Web, and 802.1x authentication |
Support |
Data encryption |
WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
|
SMS authentication |
Support |
|
PEAP authentication |
Support |
|
Data frame filtering |
Whitelist, static/dynamic blacklist |
|
User isolation |
Support |
|
Rogue AP detection and countermeasure |
Support |
|
Dynamic ACL assignment |
Support |
|
RADIUS |
Support |
|
Wireless Intrusion Detection System(WIDS) |
Support |
|
Wireless Intrusion Prevention System (WIPS) |
Support |
|
Bluetooth |
iBeacon |
Support |
Routing |
IPv4 address |
Static IP address or DHCP reservation |
IPv6 CAPWAP tunnel |
Support |
|
ICMPv6 |
Support |
|
IPv6 address |
Manual or automatic configuration |
|
Multicast |
Multicast to unicast conversion |
|
Management and Maintenance |
Network management |
SNMP v1/v2C/v3, Telnet, TFTP, Web management |
One-click Optimization |
Support |
|
(need to integrate with WIS) |
||
Fault detection and alarm |
Support |
|
Cloud AC management |
Support |
|
Statistics and logs |
Support |
|
FAT/FIT switching |
The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. |
|
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
||
External Characteristics |
Lock |
Support |
LED Indicators |
1 LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to silent mode) |
|
Relevant Standard |
Wi-Fi Alliance Certification |
Support |
Safety Standard |
GB4943, EN/IEC 60950-1 |
|
EMC Standard |
GB9254, EN301 489 |
|
Health Standard |
EN 62311 |
|
Radio Standard |
EN300 328, EN301 893 |
|
Vibration Standard |
IEC60068 2-31, ETSI EN300 019, |
|
NEBS GR-63-CORE |
||
|
Dimensions (W x D x H) (mm) |
180 × 180 × 20 |
Specifications |
(Height of AP only, excluding case and mount kit) |
|
|
Weight |
0.37kg |
Work Environment |
Temperature |
Operating Temperature: -10°C to 50°C |
Storage Temperature: -40°C to 70°C |
||
Humidity |
Operating Humidity: 5% to 95% (non-condensing) |
|
Storage Humidity: 5% to 95% (non-condensing) |
||
Installation Mode |
Ceiling/wall-mountable |
Ruijie AP720-I provides the fastest 802.11ac gigabit wireless performance and unbeatable user experience for any organization. With maximum wireless performance of 1.267Gbps, Ruijie AP720-I is the perfect solution in any WiFi deployment of diverse client with diverse needs. Innovative market leading feature, Pre-AX, CorrectLink & AirReorder drastically improve RF efficiency in high density WiFi deployment.
High Density WiFi Experience
• Pre-AX, Minimizes Co-channel & Other Interferences
Pre-AX Technology Optimizing WiFi Experience
DCCA/DTPC is adopted from 802.11ax technology to dynamically fine tune RSSI threshold to maximize the utilizable spectrum and allow more data to be transmitted. Each AP optimize the RF channel and power according to each client.
• CorrectLink, Improves Traffic Load Balancing & Client Roaming
CorrectLink Technology Optimizing WiFi Experience
CorrectLink technology is designed to analyses the latency, jitter and the signal strength of each client. It also correlates with additional information like wireless channel utilization and throughput to optimize the best user experience for wireless client.
• AirReorder, Smart Airtime Scheduling Technology
AirReorder Allocating Time Slots to Terminals
The fundamental of AirReorder is to allocate the equal the time slot to ensure that each terminal can get the fairness of RF resources as possible. This can prevent lower data rate client to degrade entire network performance by occupying the limited shared medium.
Seamless Integration with WIS Cloud
WIS Cloud Smart Services Platform
Ruijie WIS is an AI-based intelligent services designed for WiFi optimization on the cloud. Seamlessly integrated with Ruijie hardware AC on premise helps to streamline WiFi deployment planning, delivery testing as well as operation diagnosis. With WIS you can:
• Cloud site survey for deployment planning
• Smart mobile APPS for provisioning
• Visualize the user experience
• One-click WiFi optimization
• and it is FREE!
Ruijie MOHO App for WiFi Testing
As part of the Ruijie WIS solution, Ruijie MOHO is a mobile app designed to carry out WiFi testing from your fingertips. Comprehensive testing tools like collaborative test, speed test, multi-point test and etc. are available for in Ruijie MOHO app that freely download from IOS APP Store & Google Play.
WISπ One-click Optimization
Another key feature from Ruijie WIS, WISπ provides one-click optimization by using the AI based machine learning automated correlation based on the real-time information gather from your WiFi network. It truly optimizes the entire WiFi network performance by providing the best suitable configuration fine-tuning by just a click.
Virtual AP Technology
Virtual AP Enhancing Network Security
In most of the enterprise today, providing a Guest WiFi to visitor is an essential. However, Guest WiFi might become another entry point for network intrusion either it is intended or not.
Ruijie AP Virtualization technology allows to virtualize a physical AP into multiple virtual AP to handle different services. Different VAP can connect to different AC to ensure the only authorized user access to right resource.
With VAP, you can now enjoy from its benefit of:
• Resource isolation
• Flexible authentication
• Minimize RF interference
• Cost effective & secured
Benefit from the dual GE uplink design of AP740, two different CAPWAP tunnel separating employee WiFi and guest WiFi traffic into two different physical uplinks further enhanced the security.
Virtual AC Technology
Virtual AC Enabling Centralized Management
Ruijie Network AC Virtualization technology help to virtualize multiple AC into single logical AC regardless of module or appliance-based AC. It supports up to 8 members of hardware AC in single high availability cluster. AP license is shared from the license pool regardless of the number of AC in the cluster.
With the centralized management and distributed processing capability, it increases the scalability and resilience of entire Wireless Network. Simplified management streamline the IT operation as well.
PPSK Authentication
Simple and Effective Wireless Security Practice
Traditional Pre-shared keys (PSK) are shared by all users on a WLAN, giving it potential risk of PSK leak-out.
Ruijie Per-user PSK (PPSK) is an easy setup wireless authentication method with enterprise grade security level. Credentials can be created and revoked individually. Each PPSK can also be tied to a unique user/machine.
With PPSK, you can enjoy its benefit of:
• High security by using different passwords for each user and device at individual SSID
• Simple deployment, allow for batch account creation
• Ease of use and offers the same experience as WPA / WPA2-PSK
• Out-of-box feature in AC controller
• No additional AAA required
Bluetooth iBeacon Application
iBeacon for O2O Marketing
The AP700 series comes with built-in BT4.0 module, brings revolutionary changes to LBS marketing through iBeacon. iBeacon, first developed by Apple and later widely supported by other mobile devices, is a protocol leveraging Bluetooth low-energy (BLE) wireless technology to provide location-based information and services.
Gearing up with this BT 4.0 integration, the AP becomes a powerful O2O marketing tool, enabling customers to get exclusive offers from nearby shops, view details on mobile when they are close to a featured product, get alerts on what’s in-store next and many more.
Thông Tin Tham Khảo
Hình ảnh sản phẩm: