RUIJIE Access Switch RG-S2910-24GT4XS-UP-H

0 đánh giá

Kho: Còn hàng

Bảo hành: 36 tháng

0 VNĐ

Thêm vào so sánh

Gửi đến bạn bè

Số lượng:

Giới thiệu
Thông số kĩ thuật

Model		RG-S2910-24GT4XS-UP-H
Ports		24 10/100/1000BASE-T ports (PoE/PoE+), 4 1G/10G SFP+ ports (non-combo) uplink, Port 1-4 for HPoE, AC
Management Port		1 console port
Switching Capacity		Up to 256Gbps
Packet Forwarding Rate		Up to 96Mpps
PoE		IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt
Port Buffer		1.5MB
ARP Table		1,000
MAC Address		16K
Routing Table Size (IPv4/IPv6)		500 (IPv4/IPv6)
ACL Entries		In: 1500 Out: 500
VLAN		Port-based VLAN, MAC-based VLAN, Protocol-based VLAN, Private VLAN, Voice VLAN, IP subnet-based VLAN, GVRP
QinQ		Basic QinQ, Flexible QinQ
Port Mirroring		Support aggregation port as source and destination port of mirroring; Flow-based mirroring; VLAN-based mirroring; Many-to-one mirroring; One-to-many mirroring; Cross-device traffic mirroring; RSPAN; ERSPAN
Spanning Tree Protocols		IEEE802.1d STP, IEEE802.1w RSTP, standard 802.1s MSTP, Port fast, BPDU filter, BPDU guard, TC guard, TC protection, ROOT guard
DHCP		DHCP server, DHCP client, DHCP snooping, DHCP relay, IPv6 DHCP snooping, IPv6 DHCP client, IPv6 DHCP relay
Multiple Spanning Tree Protocol (MSTP) Instances		64
SDN		OpenFlow
VSU	VSU Stack Members	Up to 9 stack members
	VSL	4 BASE-X ports can be configured as VSL
Zero Configuration		CWMP(TR069)
L2 Features		MAC, VLAN, Basic QinQ, Felix QinQ, Mirroring, STP, RSTP, MSTP, Broadcast storm control, IGMP v1/v2/v3 snooping, IGMP filter, IGMP fast leave, Jumbo frame, RLDP, LLDP, REUP, G.8032
Layer 2 Protocols		IEEE802.1d, IEEE802.1w, IEEE802.1s, IGMP Snooping v1/v2/v3
Layer 3 Features		ARP, IPv4/v6
IPv4 Features		Ping, Traceroute
IPv6 Features		0-64 any length mask, ICMPv6, Neighbor Discovery, Manually configure local address, Automatically create local address, IPv6 Ping, IPv6 Tracert, IPv6 extender option head
Basic IPv6 Protocols		IPv6 addressing, Neighbor Discovery (ND), IPv6 ACL, ICMPv6, IPv6 Ping, IPv6 Tracert
IPv4 Routing Protocols		Static Routing, RIP
IPv6 Routing Protocols		Static Routing, RIPng
G.8032		Support
ACL		Standard IP ACL, Extended IP ACL, Extended MAC ACL, Expert ACL, ACL80, IPv6 ACL, ACL Logging, ACL Counter, ACL Remark, Global ACL, ACL Redirect
QoS		802.1p/DSCP traffic classification; Multiple queue scheduling mechanisms, such as SP, WRR, DRR, SP+WRR, SP+DRR; Input / output port-based speed limit; Each port supports 8 queue priorities,Dynamic QoS
IPv6 ACL		Support
Reliability		GR for RIP
EEE Format		Support IEEE 802.3az standard
Security		Binding of the IPv6 and MAC address; Port-based and MAC-based 802.1x; MAB; Portal and Portal 2.0 authentication; ARP-check; DAI; Gateway anti-ARP spoofing; Hierarchical management by administrators and password protection; RADIUS and TACACS+; SSHV1.5 and SSH V2.0; IP source guard; CPP, NFPP; Port protection
Manageability		SNMPv1/v2c/v3, RMON(1, 2, 3, 9), SSH, Syslog / Debug, NTP / SNTP, FTP, TFTP, Web
Smart Temperature Control		Temperature monitoring and alert
Dimensions (W x D x H) (mm)		440×260×44
Rack Height		1RU
MTBF		388055 hours
Lightning Protection		6KV
Power Supply		AC input: Nominal voltage range: 100V to 240V AC Maximum voltage range: 90V to 264V AC Frequency: 50Hz to 60Hz RG-PBOX-DC12: Support 12VDC output and 10/100/1000M Ethernet signal transmission RG-PBOX-AC24: Support 24VAC output and 10/100/1000M Ethernet signal transmission (*For detailed specifications of the adapters, please refer to the below table.)
Power Consumption		<460W
PoE Power Consumption		Total 370W PoE/PoE+/HPoE budget output power All 24 BASE-T ports support PoE (up to 24ports) and PoE+ (up to 12 ports) All ports from Port 1-4 support HPoE output power of up to 60W per port
Temperature		Operating temperature: 0°C to 50°C
		Storage temperature: -40°C to 70°C
Humidity		Operating humidity: 10% to 90%RH
		Storage humidity: 5% to 95%RH
Operating Altitude		-500m to 5,000m

Industrial Adapters

Model	RG-PBOX-DC12	RG-PBOX-AC24
Product Description	High-power PoE power adapter, supports 12VDC output and 10/100/1000M Ethernet signal transmission, suitable for indoor or semi-open spaces.	High-power PoE power adapter, supports 24VAC output and 10/100/1000M Ethernet signal transmission, suitable for indoor or semi-open spaces.
Ports	2 10M/100M/1000M Ethernet ports, 1 standard power supply terminal block	2 10M/100M/1000M Ethernet ports, 1 standard power supply terminal block
Power Input	Input voltage range: 43-57V DC	Input voltage range: 43-57V DC
	Input Interface: RJ45	Input Interface: RJ45
	Maximum input power: 80W (PBOX input)	Maximum input power: 80W (PBOX input)
Power Output	Power output port, 12VDC/60W	Power output port, 24VAC/60W
Operating Temperature	-20℃ to 50℃
Storage Temperature	-40℃ to 70℃
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	10% to 95% (non-condensing)
Operating Altitude	-500m to 5000m
Protection Rating	IP40
Dimensions (W x D x H) (mm)	187x89x35

Ruijie RG-S2910-H High Power over Ethernet (HPoE) Switch Series pushes the frontier withleading IEEE802.3bt standard, delivering 60W power output per port. The HPoE switchguarantees the best security, efficiency, stability and energy-saving experiences.

The HPoE switch is highly adaptive to a breadth of scenarios, eliminating rigid ties to expensive deployment costs, slow implementation cycle, unstable power supply, management complexity, and unsatisfactory security problems that alternative solutions have been struggling to solve. The switch fully addresses high PoE access needs for low power scenario as well as high power Wi-Fi hotspot application in outdoor venue. Industrial-grade Power Box (PBOX) is available to support non-PoE appliance or non-IEEE 802.3bt powered device (PD). The PBOX fully supports remote power supply for high power devices.

Feature highlights of RG-S2910-H HPoE Switch Series:

●Up to 60 Watts per Port by High-power PoE Technology (IEEE 802.3bt)

●Industrial-grade PBOX for Flexible Remote Deployment (12VDC/ 24VAC Options)

●Outstanding Power Supply Stability (Average Error Rate <>

●Time & Cost Saving on Construction Works

Device Security

In tough environments with thunderstorms and electromagnetic interference, devices are prone to damages caused by strong transient currents.

HPoE provides multiple protection mechanisms;
Overcurrent protection, preventing device damages even upon short circuits;
Up to 6KV port lightning protection, ensuring stable operation in various tough environments.

Power Supply Security

In independent deployment mode, strong-current cables are used in most cases. The voltage of power cables is higher than the safe voltage limit (36 V), and may cause accidents.

The HPoE technology complies with international power supply standards and features a low voltage and high safety, ensuring safety of O&M and working personnel.

Network Security

Support for various types of ACL, port security, and IP + MAC + Port binding technologies, effectively preventing various ARP frauds

Proactive prevention against DoS and DDoS attacks

Support for the CPU Protect Policy (CPP) and Network Foundation Protection Policy (NFPP), effectively preventing attacks against standalone devices and the entire network

Stable and Reliable Power Supply

High-power (60 W) and long-distance (100 m) power supply is provided. Compared with the conventional centralized power supply mode:

The HPoE technology complies with international standards; adjusts line loss and lowers voltage intelligently, reducing errors caused by manual adjustment; and provides independent power supply over single ports, achieving faulty domain isolation.

ost & Less Investment

30% Cost Off in Typical Configuration Mode

If an independent power supply system is deployed, materials such as the power chassis, power cables, power socket, and power adapters are required, while a construction fee will also be incurred, resulting in high overall fees.

In HPoE power supply mode, the previously mentioned materials and accessories are not required, which reduces overall fees by 30% in typical deployment scenarios.

Remote Restart for Easy O&M

In conventional power supply mode, the power supply system is not connected to the network. When a device is faulty, its power supply must be located for a manual restart, which can rapidly resolve most problems. However, if the power supply of the faulty device cannot be restarted due to environmental restrictions, other more complex solutions need to be adopted.

HPoE enables the power supply system to be connected to the network. Consequently, a faulty device can be remotely restarted using a PC to rectify faults rapidly and improve O&M efficiency.

Simplified Virtualization Management

The VSU technology virtualizes multiple physical devices into one logical device and uses a single IP address, Telnet process, and CLI for management.

Multiple devices are managed as one device, ensuring high management efficiency.

On-Demand Service Management and Control

With its powerful and flexible high-power PoE feature, the HPoE Series can fully meet the network requirements of the following scenarios:

The PoE remote power supply of the high-power devices in different systems of a smart building, such as surveillance system, access control system, information broadcasting system, digital clock system, parking system, etc.
In a variety of outdoor wireless deployment scenarios, the HPoE Series can meet the power supply requirement of the high-power outdoor wireless APs.

Scenario：

The HPoE Series provides high-power PoE remote power supply for the infrared dome cameras of the smart building, access control card reader, parking entrance gate, information broadcasting device, etc.

RG-S2910-H Deployment for Smart Building

The HPoE series, as the power supply of the IP devices, supports an immediate power-on of the devices once connected to the network.

RG-S2910-H Powering the End Devices

Values:

●Compared to the existing power supply method using power cables, the HPoE Series can significantly reduce equipment cost and implementation cost.

●High-voltage power cables are used in the existing deployment which has a certain risk. On the other side, the low-voltage power supply of HPoE is safe and reliable.

●All devices can be accessed by the network via IP deployment and can be integrated with the IPDM (IP Devices Management) system for unified remote control.

Thông Tin Tham Khảo

BỘ ĐỊNH TUYẾN DRAYTEK VIGO

WIFI IPCOM

WIFI UNIFI

Hình ảnh sản phẩm: