RUIJIE Access Switch RG-S2910-10GT2SFP-P-E

0 đánh giá

Kho: Còn hàng

Bảo hành: 36 tháng

0 VNĐ

Thêm vào so sánh

Gửi đến bạn bè

Số lượng:

Giới thiệu
Thông số kĩ thuật

Model		RUIJIE Access Switch RG-S2910-10GT2SFP-P-E
Ports		10 10/100/1000BASE-T ports (8ports PoE/PoE+), 2 Gigabit SFP ports (non-combo) uplink, Port 1-8 for HPoE, AC
Management Port		1 console port
Switching Capacity		Up to 256Gbps
Packet Forwarding Rate		Up to 18Mpps
PoE		IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt
Port Buffer		1.5MB
ARP Table		500
MAC Address		16K
Routing TableSize (IPv4/IPv6)		64 (IPv4/IPv6)
ACL Entries		In: 750 Out: N/A
VLAN		Port-based VLAN, MAC-based VLAN, Protocol-based VLAN, Private VLAN, Voice VLAN, IP subnet-based VLAN, GVRP
QinQ		Basic QinQ, Flexible QinQ
Port Mirroring		Support aggregation port as source and destination port of mirroring; Flow-based mirroring; VLAN-based mirroring; Many-to-onemirroring; One-to-many mirroring; RSPAN; ERSPAN
Spanning TreeProtocols		IEEE802.1d STP, IEEE802.1w RSTP, standard 802.1s MSTP, Port fast, BPDU filter, BPDU guard, TC guard, TC protection, ROOT guard
DHCP		DHCP server, DHCP client, DHCP snooping, DHCP relay, IPv6 DHCP snooping, IPv6 DHCP client, IPv6 DHCP relay
MultipleSpanning TreeProtocol (MSTP) Instances		64
SDN		OpenFlow
VSU	VSU Stack Members	N/A
	VSL	N/A
Zero Configuration		CWMP(TR069)
L2 Features		MAC, VLAN, Basic QinQ, Felix QinQ, Mirroring, STP, RSTP, MSTP, Broadcast storm control, IGMP v1/v2/v3 snooping, IGMP filter, IGMP fast leave, Jumbo frame, RLDP, LLDP, REUP, G.8032
Layer 2 Protocols		IEEE802.1d, IEEE802.1w, IEEE802.1s, IGMP Snooping v1/v2/v3
Layer 3 Features		ARP, IPv4/v6
IPv4 Features		Ping, Traceroute
IPv6 Features		0-64 any length mask, ICMPv6, Neighbor Discovery, Manually configure local address, Automatically create local address, IPv6 Ping, IPv6 Tracert, IPv6 extender option head
Basic IPv6 Protocols		IPv6 addressing, Neighbor Discovery (ND), IPv6 ACL, ICMPv6, IPv6 Ping, IPv6 Tracert
IPv4 Routing Protocols		Static Routing, RIP
IPv6 Routing Protocols		Static Routing, RIPng
G.8032		Support
ACL		Standard IP ACL, Extended IP ACL, Extended MAC ACL, Expert ACL, ACL80, IPv6 ACL, ACL Logging, ACL Counter, ACL Remark, Global ACL, ACL Redirect
QoS		802.1p/DSCP traffic classification; Multiplequeue scheduling mechanisms, such as SP, WRR, DRR, SP+WRR, SP+DRR; Input port-based speed limit; Each port supports 8 queuepriorities,Dynamic QoS
IPv6 ACL		Support
Reliability		GR for RIP
EEE Format		Support IEEE 802.3az standard
Security		Binding of the IPv6 and MAC address; Port-based and MAC-based 802.1x; MAB; Portal and Portal 2.0 authentication; ARP-check; DAI; Gateway anti-ARPspoofing; Hierarchical management by administrators and password protection; RADIUS and TACACS+; SSH V1.5 and SSH V2.0; IP source guard; CPP, NFPP; Port protection
Manageability		SNMPv1/v2c/v3, RMON(1, 2, 3, 9), SSH, Syslog / Debug, NTP / SNTP, FTP, TFTP, Web
Smart TemperatureControl		Temperature monitoring and alert
Dimensions (W x D x H) (mm)		340×260×44
Rack Height		1RU
MTBF		408710 hours
Lightning Protection		6KV
Power Supply		AC input: Nominal voltage range: 100V to 240V AC Maximum voltage range: 90V to 264V AC Frequency: 50Hz to 60Hz RG-PBOX-DC12: Support 12VDC output and 10/100/1000M Ethernet signal transmission RG-PBOX-AC24: Support 24VAC output and 10/100/1000M Ethernet signal transmission (*For detailed specifications of the adapters, please refer to the below table.)
Power Consumption		<630W
PoE Power Consumption		Total 520W PoE/PoE+/HPoE budget output power All ports from Port 1-8 support HPoE output power of up to 60W per port
Temperature		Operating temperature: 0°C to 50°C
		Storage temperature: -40°C to 70°C
Humidity		Operating humidity: 10% to 90%RH
		Storage humidity: 5% to 95%RH
Operating Altitude		-500m to 5,000m

Industrial Adapters

Model	RG-PBOX-DC12	RG-PBOX-AC24
Product Description	High-power PoE power adapter, supports 12VDC output and 10/100/1000M Ethernet signal transmission, suitable for indoor or semi-open spaces.	High-power PoE power adapter, supports 24VAC output and 10/100/1000M Ethernet signal transmission, suitable for indoor or semi-open spaces.
Ports	2 10M/100M/1000M Ethernet ports, 1 standard power supply terminal block	2 10M/100M/1000M Ethernet ports, 1 standard power supply terminal block
Power Input	Input voltage range: 43-57V DC	Input voltage range: 43-57V DC
	Input Interface: RJ45	Input Interface: RJ45
	Maximum input power: 80W (PBOX input)	Maximum input power: 80W (PBOX input)
Power Output	Power output port, 12VDC/60W	Power output port, 24VAC/60W
Operating Temperature	-20℃ to 50℃
StorageTemperature	-40℃ to 70℃
Operating Humidity	10% to 90% (non-condensing)
StorageHumidity	10% to 95% (non-condensing)
Operating Altitude	-500m to 5000m
Protection Rating	IP40
Dimensions (W x D x H) (mm)	187x89x35

Ruijie RG-S2910-H High Power over Ethernet (HPoE) Switch Series pushes the frontier with leading IEEE802.3bt standard, delivering 60W power output per port. The HPoE switch guarantees the best security, efficiency, stability and energy-saving experiences.

The HPoE switch is highly adaptive to a breadth of scenarios, eliminating rigid ties to expensive deployment costs, slow implementation cycle, unstable power supply, management complexity, and unsatisfactory security problems that alternative solutions have been struggling to solve. The switch fully addresses high PoE access needs for low power scenario as well as high power Wi-Fi hotspot application in outdoor venue. Industrial-grade Power Box (PBOX) is

High-Power and Remote Power Supply, Ensuring Power Throughout the Network

HPoE is used to resolve problems, such as high deployment costs, long construction periods, unstable power supply, difficult O&M, and low safety coefficient caused by independent deployment of the power supply system required for power supply to high-power STAs. HPoE can be widely used in weak-current, new deployment and reconstruction scenarios and meet power supply requirements of high-power STAs in systems such as video surveillance, door control, information publishing, parking, and DDC.

Simple Deployment

No independent power supply system required

Two-in-one network and power cable

Shortened construction period

Reduced costs

Secure and Reliable

Security and reliability are guaranteed from device to power supply and right through to the network.

Device Security Power Supply Security Network Security

Easy O&M

Offering you an unparalleled experience in every aspect ranging from
device O&M right through to service management and control

Connection of the power supply system to the network for remote restart

Simplified Virtualization Management
On-demand service management and control

Device Security

In tough environments with thunderstorms and electromagnetic interference, devices are prone to damages caused by strong transient currents.

HPoE provides multiple protection mechanisms;
Overcurrent protection, preventing device damages even upon short circuits;
Up to 6KV port lightning protection, ensuring stable operation in various tough environments.

Power Supply Security

In independent deployment mode, strong-current cables are used in most cases. The voltage of power cables is higher than the safe voltage limit (36 V), and may cause accidents.

The HPoE technology complies with international power supply standards and features a low voltage and high safety, ensuring safety of O&M and working personnel.

Network Security

Support for various types of ACL, port security, and IP + MAC + Port binding technologies, effectively preventing various ARP frauds

Proactive prevention against DoS and DDoS attacks

Support for the CPU Protect Policy (CPP) and Network Foundation Protection Policy (NFPP), effectively preventing attacks against standalone devices and the entire network

Stable and Reliable Power Supply

High-power (60 W) and long-distance (100 m) power supply is provided. Compared with the conventional centralized power supply mode:

The HPoE technology complies with international standards; adjusts line loss and lowers voltage intelligently, reducing errors caused by manual adjustment; and provides independent power supply over single ports, achieving faulty domain isolation.

Thông Tin Tham Khảo

BỘ ĐỊNH TUYẾN DRAYTEK VIGO

WIFI IPCOM

WIFI UNIFI

Hình ảnh sản phẩm: