RUIJIE RG-S1809-P Switch SMB 1800 Series

0 đánh giá

Kho: Còn hàng

Bảo hành: 36 tháng

0 VNĐ

Thêm vào so sánh

Gửi đến bạn bè

Số lượng:

Giới thiệu
Thông số kĩ thuật

Model	RG-S1809-P
Ports	8-port 10/100BASE-T 1-port 10/100/1000BASE-T Uplink
Power Supply	DC input: DC 53.5V/2.3A Rated current: 2.3A Max voltage range: 90V to 290V
PoE	Support
Power Consumption	120W(Max)
Operating Temperature	0ºC to 50ºC (32ºF to 122ºF)
Storage Temperature	-40ºC to +70ºC (-40ºF to 158ºF)
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% RH non-condensing
Fan	N/A
EMC Standards	EN55032(Class B)
Dimensions (W×D×H)	190 mm x 100 mm x 28 mm
Switching Capacity	3.6Gbps

Product Appearance

The front panel of RG-S1809-P Ethernet switchprovides a power LED indicator, PoE LED indicators and Link/ACT LED indicators,8-port 10/100BASE-T Ethernet ports and one Gigabit uplink port.

Figure 1-16 Appearance of RG-S1809-P

Front Panel

Figure 1-17 Front Panel of RG-S1809-P

Note

1. Power status indicator

2. 10/100BASE-T Link/ACT indicator(1-8),10/100/1000BASE-T

Link/ACT indicator(Uplink)

3. PoE Status LED indicator

4. 10/100 BASE-T Ethernet port

5.10/100/1000 BASE-T Ethernet port

Rear Panel

Figure1-18 Rear Panel of RG-S1809-P

Note	1. Grounding connector 2. DC power input port

Power Supply

RG-S1809-P switch can be powered with DC power.

Rated current: 2.3A

Rated voltage: 53.5V

Heat Dissipation

RG-S1809-P switch is designed with no fans. To ensure good dissipation,sufficient space (10 cm distance from both sides and the back panel of thechassis) should be reserved for ventilation. Dust the device every three monthsto avoid blocking the ventilation openings.

PoE

The PoE power supplyof the RG-S1809-P switch is designed to support the IEEE802.3af and802.3at standards. It uses Alternative B, that is, uses the idle line pairs (45+, 78-) for powersupply.

LED Indicator

Indicator	Faceplate Marker	Status	Indication
Power indicator	PWR	Off	The switch is powered down.
Power indicator	PWR	On	The switch is powered on.
10/100Mbps Ethernet port indicator	1-8	Off	The port is NOT connected.
		Solid green	The port is connected at 10/100 Mbps.
		Blinking green	The port is receiving or transmittingtraffic at 10/100 Mbps.
1000Mbps Ethernet port indicator	Uplink	Off	The port is NOT connected.
		Solid green	The port is connected at 10/100/1000 Mbps.
		Blinking green	The port is receiving or transmittingtraffic at 10/100/1000 Mbps.
PoE Status indicator	1-8	Off	No PoE power supply.
		Solid orange	PoE is operational.
		Blinking orange	Abnormal PoE power supply

RG-S1800-P switch supports the dynamic PoE mode, that is,Dynamic-FIFS (Dynamic First In First Service) mode. This mode enables automaticdetection and power-on of PD devices and allocates the PoE port power by theactual power consumption of the PD device. Device powering will be disabled ifthe required power is greater than the available power.